Rewah Paint Product Catalogue

You are here : Rewah-paint

ESTETIK ISOLPRIM

Universal, insulating, water-based primer for interior and exterior use.

As an insulating primer for several types of pollution such as nicotine deposits, smoke and soot stains*, marks left by water, coffee and tea, the tannin from wood, etc. As a base coat for different types of exotic species of timber.As a bonding primer for various difficult, porous and non-porous surfaces (we recommend that you conduct a test first). *The soot stains must be clean and dry. This is in order to avoid peeling. Always test beforehand.

ESTETIK MAT

Top-quality functional mat acrylate topcoat for indoors.

Matt topcoat for stony substrates: brick, plastered internal walls, plasterboard, etc …Internal walls and ceilings 

ESTETIK PLAFOND

Top-quality cover-all mat acrylate finish for ceilings.

- Very matt topcoat for plaster ceilings, plasterboard sheets, concrete, etc, ..

ESTETIK PRIM

Top-quality functional acrylate primer for indoors.

Basecoat for stony substrates: brick, plastered internal wall, plasterboard, etc, …For treating and lightly sealing soiled surfacesFor fixing slightly powdery substrates 

INDUCRYL FACADE TQ

Elastic, water borne, acrylic coating. Micro porous, waterproof and carbonation inhibitor.

INDUCRYL FAÇADE TQ is used for the aesthetic waterproofing and protection of various building materials such as brick, concrete, wood, decorative plasterwork, … INDUCRYL FAÇADE TQ is suitable for application in both new building and renovation.

INDUCRYL FACADE TQ FORCEFIB+

Elastic, water borne, coloured coating. MIcro porous, waterproof and a carbonation inhibitor.

Available documents: Safety sheet (pdf)

INDUCRYL TQ QUARTZ

Coloured and elastic waterbased structure coating, acrylic resin based.

INDUCRYL TQ QUARTZ is intended for decorative use, waterproofing and protection of various construction materials such as brickwork, concrete, cement renderings and synthetic plasters. INDUCRYL TQ QUARTZ is used in new construction and renovation and particularly when cracks and/or decorative faults must be masked or where a rough, sandlike finish is desired.

INDUPACT

Concentrated impregnation for the Inducryl gamma.

The diluted INDUPACT is used as an impregnating layer on a friable and very porous surface before painting this surface with a paint from our range of INDUCRYL products. This product can also be used as a fixing layer in order to prevent interior walls or interior plastering from becoming dusty or chalky.

KALEI LISCIO 2

Cement free and colourable lime mortar with natural hydraulic lime.

KALEI LISCIO 2 is a cement-free and colourable fine lime mortar, with a natural hydraulic lime base and mineral fillers. KALEI LISCIO 2 can be used to add an authentic appearance and control moisture in internal and/or external walls. KALEI LISCIO 2 can also be applied as a thin primer coat.

KALKVERF CALCIANA

Resin-free lime paint made of pur air-hardening lime and natural fillers.

Lime paint is a “traditional” product, which is now widely used due to its unique properties. Because of its constituents, KALKVERF CALCIANA is suitable for application on loam, calciferous materials, cement-based materials, natural stone, brick, mineral bases, etc. provided they are suitable or have been specially prepared. KALKVERF CALCIANA is equally suitable for use on historic buildings and for sustainable construction.   

SALTPRIM-2K

Bicomponent salt-resistant primer for rocky materials.

SALTPRIM-2K can be used to seal out the remains of salts, including nitrates and chlorides on rocky materials and stop them causing damage to top coats. However, it must be ensured that the source of moisture, which has caused salt efflorescence, is removed before the product is applied. SALTPRIM-2K can also be used as a universal primer on rocky materials. The waterproofing properties of SALTPRIM-2K also enable it to be applied to the low-lying parts of a building to protect it against the effects of stagnant water, thereby preventing any ingress as well as any damage to the constructions materials. 

Realisations with this product: Neptune Residence in Berlare

TENSIOCOAT TQ

Moisture proof vapour-open coloured silane hybrid coating.

TENSIOCOAT TQ is used as a decorative, moisture-proof protection of various construction materials such as brick, stone, concrete and all hydraulic or synthetic bound plastering. TENSIOCOAT TQ is the answer for treatments whereby the microporous properties of a mineral paint and the moisture-proof characteristics of a high-grade acrylic paint are required. TENSIOCOAT TQ is used in new constructions and renovation.

TENSIOCOAT TQ FIX

Ready-to-use micro emulsion for the Tensiocoat gamma.

TENSIOCOAT TQ FIX is used on a strong absorbent base and/or powdery surface of the base before being painted over with TENSIOCOAT TQ. Can also be used as a fixing layer to prevent interior walls and plastering from forming chalk.  

TENSIOCOAT TQ QUARTZ

Moisture proof vapour-open coloured silane hybrid coating with quartz structure.

TENSIOCOAT TQ QUARTZ is used as a decorative, moisture-proof protection of various construction materials such as brick, stone, concrete and all hydraulic or synthetic bound plastering. TENSIOCOAT TQ QUARTZ is the answer for treatments whereby the microporous properties of a mineral paint and the moisture-proof characteristics of a high-grade acrylic paint are required. TENSIOCOAT TQ QUARTZ is used in new constructions and renovation.

UNICOVER TQ MAT

Mat, water borne, coloured coating for different surfaces, interior and exterior.

UNICOVER TQ MAT is used for the decorative waterproofing and protection of various building materials such as brick, concrete, wood, decorative plasterwork, … UNICOVER TQ MAT is applied in the same way as paint used on façades and walls, for new construction and renovation projects, on the inside and outside of buildings. Can also be used in humid rooms (bathrooms, shower rooms, ...). 

Realisations with this product: Neptune Residence in Berlare

UNICOVER TQ SATIN

Water borne, coloured coating for different surfaces, interior and exterior.

UNICOVER TQ SATIN is used for the decorative waterproofing and protection of various building materials such as brick, concrete, wood, decorative plasterwork, … UNICOVER TQ SATIN is applied in the same way as paint used on façades and walls, for new construction and renovation projects, on the inside and outside of buildings. Can also be used in humid rooms (bathrooms, shower rooms, ...). 

© Rewah Paint 2019 - info@rewahpaint.com